MECHANICAL PROJECTS

(100+Updated) Thermal Engineering Projects List for Mechanical and Diploma Students

Thermal Projects plays a vital role in the field of Thermal Engineering.The areas of thermal projects listed in this article are as follows i.e generation of power from coal or from wastes,providing heat treatment process to all the components in the mechanical industry to remove the residual stresses,Heat transfer,S.I and C.I Engines,Automobile Industry etc. A part from these,If you want to do any project in this field,there is a broader scope on it.In this article,I will be explaining about the (100+Updated) Thermal Engineering Projects list for Mechanical and Diploma Students in a broader way.

(100+Updated) Thermal Engineering Projects List for Mechanical and Diploma Students are presented in this article
(100+Updated) Thermal Engineering Projects List for Mechanical and Diploma Students

List of Thermal Projects for Mechanical Students:

A list of more than 100 thermal projects are placed in this article.The students of Diploma as well as Mechanical should use these thermal projects for their Mini and Major Projects.The 100+ Thermal Projects are shown below.

  1. Natural Convective Heat Transfer from Inclined Narrow Plates
  2. Fabrication of Solar air conditioning Machine
  3. Computer simulations of natural convection of single phase nano fluids in simple enclosures
  4. A unified approach to the analysis of unidirectional and bi-directional parallel flow heat exchangers
  5. Automatic pneumatic vulcanizing Machine using heat sensor
  6. Design oriented methodology for thermal behavior prediction of a power gearing transmission.
  7. Stall characteristics and tip clearance effects in forward swept axial compressor rotors
  8. A Project on Water cooler cum Water heater by using refrigeration System
  9. Calculating heat transfer rate by varying cooling fluid for engine cylinder fins.
  10. Fabrication of Paper cup folding Machine
  11. Heat transfer analysis and optimization of engine fins of varying geometry and thermal conductivity.
  12. A Project on Fabrication of Solar refrigeration system
  13. Optimizing an intercooled compressor for an ideal gas model
  14. A Project on Fabrication of Solar Air Cooler cum Heater
  15. Improving the heat transfer rate of AC condenser by optimizing material.
  16. Design & Fabrication of Chemical Processing Plant
  17. A Project on Fabrication of thermo-electric refrigerator 
  18. Experimental investigation of Solar Pond integrated with PCM storage
  19. A Project on Fabrication of Hot and Cold Water Dispenser
  20. Effects of axial non-uniform tip clearances on aerodynamic performance of a transonic axial compressor
  21. Solar Water Purification by using thermal method
  22. Thermal-hydraulic analysis of a 600 mw supercritical CFB boiler with low mass flux.
  23. A Project on Fabrication of Mist Coolant system
  24. Performance and internal flow of sirocco fan using contra-rotating rotors
  25. A Project on Fabrication of Solar Kettle (or) Solar Parabolic Collector.
  26. Experimental investigation of an air conditioning system driven by LPG engine
  27. Electrical Power Generation using Steam Power Plant
  28. Fabrication of Solar Parabolic trough collector with auto tracking
  29. Multi-Purpose Ground Dryer (or) Multi-Purpose Dryer and Room Heater
  30. A Project on Transformer heat reduction system
  31. Turbine blade film cooling using PSP technique
  32. Fabrication of Solar Water Disalation (Purification) by using parabolic method
  33. A Project on Fabrication of Balloon power generator
  34. A Project on Solar powered Electrolux refrigeration system
  35. Visual landing gear arrangement with Tyre Pressure Inflation system
  36. Improving the performance of an engine block for various cooling fluids.
  37. A Project on Fabrication of Hot and Cold Water Dispenser
  38. Single-Phase heat transfer and pressure drop inside internally helical-grooved horizontal small-diameter tubes
  39. A Project on Fabrication of double reflection solar Cooker
  40. Effect of a cutting fluids on H.S.S and carbide cutting tools by Transient Thermal analysis
  41. A Project on Fabrication of Activated Carbon Manufacturing Plant
  42. A Project on Fabrication of automatic humidification system
  43. Natural Convective Heat Transfer from Two Adjacent Narrow Plates
  44. A Project on Fabrication of Life time kit for an Air conditioning
  45. A Project on Fabrication of Mist Coolant system
  46. A Project on Fabrication of Solar air conditioning Machine
  47. A Project on Remote controlled boiler flame adjustment system
  48. A Project on Fabrication of furnace using infrared Lamp
  49. Effect of thermal loads on a simple cylinder head.
  50. Unsteady tip clearance flow in an isolated axial compressor rotor
  51. Turbulent Natural Convective Heat Transfer from Narrow Plates
  52. Parabolic Trough collector cum Vapor Adsorption System
  53. A Project on Fabrication of Ground Dryer
  54. Automatic temperature controller with cooling system
  55. A Project on Fabrication of thermo-electric refrigerator
  56. Effect of a petrol, diesel and blended fuels on C.I engines
  57. A Project on Fabrication of Mini Water Heater
  58. A Project on Refrigeration using waste heats in car
  59. Elimination of carbon particles from exhaust gas
  60. A Project on Fabrication of Solar sterling engine
  61. A Project on Fabrication of Mini Water Heater
  62. Fabrication of solar water Dissolution by using photovoltaic method
  63. A Project on Fabrication of Bottle Cooler
  64. A Project on Fabrication of Solar Air Dryer
  65. A Project on Fabrication of L.L.D.P. Material extruder
  66. A Project on Fabrication of Miniature Boiler
  67. Force-Fed Micro channels for High Flux Cooling Applications
  68. Improving to the heat transfer rate for multi cylinder engines
  69. A Project on Waste chill recovery heat exchanger
  70. A Project on Fabrication of Solar Air Conditioner
  71. A Project on Fabrication of Lube oil cooler
  72. A Project on Fabrication of Micro Wave Oven
  73. Automatic Electro-plating coating process
  74. A Project on Fabrication of Solar Fridge
  75. A Project on Fabrication of Airbag Automation
  76. Air compressor using crank and slotted link mechanism
  77. Low pressure solar water heater with auto tracking
  78. Fabrication of Cooling jacket for motorcycle
  79. A Project on Fabrication of sterling cooler
  80. Design of absorption refrigeration system driven by engine exhaust gas for vehicles
  81. A Project on Fabrication of Latent Heat Exchanger
  82. A Project on Fabrication of Cooling tower
  83. Improving the heat transfer rate of AC evaporator by optimizing material
  84. A Project on Emission tester for automobile
  85. Life cycle optimization of residential air conditioner replacement
  86. A Project on Fabrication of Mini Jet Engine
  87. A Project on Fabrication of Miniature Boiler
  88. Solar Sterling engine with parabolic collector
  89. Electrical power generation system by using Gasifier
  90. Energy conservation in steam systems
  91. A Project on Fabrication of Heat pipe
  92. A Project on Energy conservation in steam systems
  93. Fabrication of Solar Water Heater by using parabolic collector
  94. A Project on Fabrication of Solar Air Cooler
  95. Fabrication of thermo-electric solar air conditioner
  96. Thermal conductivity and latent heat thermal energy storage characteristics of Paraffin/Expanded Graphite Composite as Phase change material.
  97. Experimental investigation of the discharge valve dynamics in a reciprocating compressor for trans-critical CO2 refrigeration cycle.
  98. Design of a car air conditioning system based on an absorption refrigeration cycle using energy from exhaust gas of an internal combustion engine.
  99. Transient modeling of hybrid loop heat pipe systems with multiple evaporators
  100. A compact dynamic model for household vapor compression refrigerated systems
  101. Natural convective heat transfer from a narrow vertical flat plate with a uniform surface heat flux and with different plate edge conditions

This is the complete Updated list of 100+ Thermal projects for Diploma and Mechanical Engineering Students.Hope this article with the list of thermal projects is helpful to you.

If you have any doubts, feel free to ask from the comments section. Please Share and Like this blog with the whole world so that it can reach to many.

 

Save

Save

Save

Leave a Reply